Регуляторы давления сжатого природного газа (PRU / PRMS)

The CNG pressure regulating unit is a special device that can automatically reduce the pressure of the gas transmitted from the industrial pipeline to the required pressure.
It can reduce the higher gas pressure at the equipment inlet to the pressure value required by the equipment outlet, and can integrate metering and odorizing functions as required.
It integrates pressure regulation, metering, filtering, emergency shut-off, and safety release.
Suitable for natural gas, artificial gas, coke oven gas, liquefied petroleum gas, methane gas and other gases.
The CNG compressed natural gas (below 25 MPa) go through the filter, high pressure ball valve and high-pressure emergency cut-off valve into the primary heat exchanger.
Within the gas heat exchanger for heating, gas after primary voltage regulator to 0.7 ~ 1.2 MPa, after the secondary heat exchanger and the secondary voltage regulator to 0.2 ~ 0.4 MPa (if the outlet pressure is lower, the third stage decompression), enter the flow calculation of the flow meter, decompression at all levels of pressure, temperature and emergency cut-off valve and interlock control system.

• Reduces250 bar CNG down to safe end-use pressure of1–10 bar
• Integrates pressure regulation, metering, filtering, emergency shut-off & safety release
• Up to3-stage decompression for precise outlet control
• Suitable for natural gas, LPG, coke oven gas, artificial gas & methane
• Customizable with heat exchanger, flow meters, PLC control & HMI

 

Typical Models	InletPressure	OutletPressure	OptionalFunction
		（customized）
200Nm3 per hour	250bar	2~4bar	Heatexchanger;
300Nm3 per hour	250bar	2~4bar	Mass flow meter;
500Nm3 per hour	250bar	2~4bar	PLC automatic control;
1000Nm3 per hour	250bar	2~4bar	HMI;
2000Nm3 per hour	250bar	2~4bar	High pressure hose;
3000Nm3 per hour	250bar	2~4bar	International brand valves;
6000Nm3 per hour	250bar	2~4bar	и т. д.

Remark: The above specifications are only for typical types. The more accurate & detailed parameters and technical drawings are available upon request

The CNG PRU (PRMS) can be shipped by standard containers, 20GP, 40GP, 40HQ, with good fixed protection in container.
Packaging :
Main System : The skid-mounted CNG PRU is fixed on a steel pallet with anti-vibration pads to absorb shocks during transportation. It is wrapped with moisture-proof film and a heavy-duty tarpaulin to protect against rain, dust, and mechanical damage.
Precision Components : Pressure regulators, flowmeters, and HMIs are packed in foam-lined, waterproof boxes with clear labeling. This prevents damage to delicate parts and simplifies identification during installation.
Accessories : High-pressure hoses, filters, and spare parts are packed in separate labeled boxes, ensuring all components are accounted for upon delivery.
Shipping Methods :
Standard Container Shipping : Uses 20GP (20ft General Purpose), 40GP (40ft General Purpose), or 40HQ (40ft High Cube) containers. This method is cost-effective, secure, and suitable for both sea and land transportation.
Custom Shipping Solutions : For oversized models (e.g., 6000Nm³/H), we coordinate with logistics partners to use flatbed trucks or bulk vessels, with additional reinforcement to secure the system during transit.
Logistics Coordination : Our team provides detailed shipping documents (packing list, certificate of origin, customs clearance papers) and works with the user to confirm delivery schedules. We also offer on-site unloading guidance to ensure safe handling of the system.