Hydrogen Jumbo Tube Cylinder, Cascade, Container, Trailer

Water capacity: 6.4m³ to 29.4m³, from 2tubes to 16 tubes, all sets can be customized
Model type: Single-cylinder, Cascade(group cylinders), Skid-containers(MEGC), Trailers, full-range products for hydrogen
H₂-grade alloy steel: 4130X engineered for H₂ service; 14.8 mm wall at 20 MPa, 18.4 mm wall at 25 MPa for a higher safety margin
Heat-spinning seamless forming: Improves material density and strength, eliminating weld seams at the source and reducing leak risk
Walking-beam continuous Q&T: Enhances tube yield strength and toughness for stable long-term high-pressure service
Certification & traceability: ISO 11120, BV / TÜV / LRS inspected, compliant with ADR / RID / IMDG. Full per-tube traceability across the supply chain

اطلب عرض أسعار الآن

الوصف

SinoCleansky H₂ Jumbo Tube Container have muti-type to offer on-site and transport solution: MEGC, Trailer, Cascade (stationary storage group cylinders) and single cylinder.

Cascade normally use 3 tubes jumbo cylinders as a hydrogen storage peak shaving.
MEGC could select from 8 tubes to 12 tubes (based on road weight limits or hydrogen consumption), compact on ONE skid, as an international transport container.
Trailer, mainly us 8 tubes to 12 tubes, plus 2 axles or 3 axles chassis, easy to install locally, extend hydrogen delivery distance.
Working pressure could select 20MPa or 25 MPa based on actual presser requirement.
Gas capacity from 1,505Nm³ to 6,020Nm³, meet various gas consumption needed.
Material-4130X steel, globally certified for H₂ transport and storage, perfectly solve hydrogen embrittlement issue.

SinoCleansky’s standard 20ft / 40ft footprint into a virtual pipeline — delivering up customization jumbo tube container, from remote refueling stations and island micro-grids to factory back-up supply and fuel-cell fleet logistics, our ISO 11120-certified, third-party-inspected tubes keep pressure where it belongs and risk where it can’t reach.

Key Application:

Virtual Pipeline: Tube banks mounted on a skid or trailer chassis form a ‘virtual pipeline’ for hydrogen.
Pressure Vessel: Core load-bearing pressure component of Skid Containers and Tube Trailers (MEGC).
Fixed Cascade: Banked tubes for daughter-station supply, factory back-up and hydrogen-grid peak shaving.
Multi-gas: Engineered for H₂, also suitable for CNG across energy and mobility scenarios.

One skid, every mode: road, rail, and sea compliant out of the box.

المواصفات الفنية

Please note, hydrogen filling volume may vary due to on-site operation, the following technical parameters are for reference only.

Hydrogen jumbo product series can be customized like pipeline layout, valves, gauges and others, please discuss your project with our experts.

25MPa Specification:

Item / Model	SCSF8-2210-H2	SCSF9-2210-H2	SCSF10-2210-H2	SCSF11-2210-H2	SCSF12-2210-H2	SCSF03-2210-H2
عدد الأسطوانات	8	9	10	11	12	3
وسيط التعبئة	Hydrogen	Hydrogen	Hydrogen	Hydrogen	Hydrogen	Hydrogen
نوع الفولاذ	4130X	4130X	4130X	4130X	4130X	4130X
ضغط التشغيل	25MPa	25MPa	25MPa	25MPa	25MPa	25MPa
سعة المياه في الأسطوانة	2210L	2210L	2210L	2210L	2210L	2210L
حجم الأسطوانة/مم	*φ55910975**	*φ55910985**	*φ55910985**	*φ55910985**	*φ55910985**	*φ55910985**
سماكة الجدار/مم	18.4	18.4	18.4	18.4	18.4	18.4
درجة حرارة التشغيل	-50 درجة مئوية ~ 65 درجة مئوية	-50 درجة مئوية ~ 65 درجة مئوية	-50 درجة مئوية ~ 65 درجة مئوية	-50 درجة مئوية ~ 65 درجة مئوية	-50 درجة مئوية ~ 65 درجة مئوية	-50 درجة مئوية ~ 65 درجة مئوية
وزن المعدات/كجم	27,420	30,417	31,600	34,380	39,360	9,548
الوزن الإجمالي/كجم	27,764	30,804	32,093	34,923	39,876	9,677
حجم المياه/م³	17.68	19.89	22.10	24.30	26.52	6.63
حجم الغاز المملوء/Nm³	4,013	4,515	5,017	5,516	6,020	1,505
بشكل عام الأبعاد/(الطول × العرض × الارتفاع) مم	*1219224381400* (40ft skid)	*1219224381890* (40ft skid)	*1219224381890* (40ft skid)	*1219224382591* (40ft skid)	*1219224382000* (40ft skid)	*116808202135* *(Cascade)*

20MPa Specification:

Item / Model	SCSF8-2450-H2	SCSF10-2450-H2	SCSF12-2450-H2
عدد الأسطوانات	8	10	12
وسيط التعبئة	Hydrogen	Hydrogen	Hydrogen
نوع الفولاذ	4130X	4130X	4130X
ضغط التشغيل	20MPa	20MPa	20MPa
سعة المياه في الأسطوانة	2450 لتر	2450 لتر	2450 لتر
حجم الأسطوانة/مم	*φ55911580**	*φ55911580**	*φ55911580**
سماكة الجدار/مم	14.8	14.8	14.8
درجة حرارة التشغيل	-50 درجة مئوية ~ 65 درجة مئوية	-50 درجة مئوية ~ 65 درجة مئوية	-50 درجة مئوية ~ 65 درجة مئوية
وزن المعدات/كجم	23,680	29,600	34,805
الوزن الإجمالي/كجم	23,983	29,980	35,265
حجم المياه/م³	19.60	24.50	29.40
حجم الغاز المملوء/Nm³	3,371	4,214	5,057
بشكل عام الأبعاد/(الطول × العرض × الارتفاع) مم	*1219224381400* (40ft skid)	*1219224381890* (40ft skid)	*1219224382000* (40ft skid)

Chassis Specification

Item/Model	SCSF-40ft-3 axle	SCSF-20ft-3 axle	SCSF-20ft-2 axle
Length(mm)	12,250	8,500	7,600
width(mm)	2,500	2,500	2,500
Tare Weight(kg)	6,000	4,700	3,700
Rated Weight(kg)	42,000	35,300	31,300
Gross Weight(kg)	48,000	40,000	35,000
Axle	3	3	2
Tire	12R22.5	12R22.5	12R22.5
Traction pin	50# assembled & 90# attached	50# assembled & 90# attached	50# assembled & 90# attached
Landing leg	JOST A440 single-action leg	JOST A440 single	JOST A440 single
Braking system	ABS	ABS	ABS
Tool box	1	1	1
Fire extinguisher	2	2	2

Jumbo Trailer Dimension Reference ( eg.MEGC + chassis)

Item	Length	Width	مرتفع	الوزن
Jumbo Tube Skid-MEGC (12tube-40ft)	12m	2.4m	2m	39.6ton
Chassis 40ft-3 axle	12.4m	2.5m	1.5m	6ton
Trailer-40ft-3 axle Total	12.4m	2.5m	3.5m	45.6ton
Jumbo Tube Skid-MEGC (16tube-20ft)	6m	2.4m	2.5m	27.4ton
Chassis 20ft-2 axle	7.6m	2.5m	1.5m	3.7ton
Trailer-20ft-2 axle Total	7.6m	2.5m	4.0m	31.1ton
Jumbo Tube Skid-MEGC (16tube-20ft)	6m	2.4m	2.5m	27.4ton
Chassis 20ft-3 axle	8.5m	2.5m	1.5m	4.7ton
Trailer-20ft-3 axle Total	8.5m	2.5m	4.0m	32.1ton

التغليف والشحن

Skid-Container (MEGC): can be shipped as a skid-mounted module; a CSC plate is included for international intermodal transport.
Trailer: can be shipped as bulk cargo with the container and chassis together, or with the container shipped separately as a standard GP (general-purpose) unit and the chassis as bulk cargo.
Cascade: should be shipped as bulk cargo only.

التقارير والشهادات

SinoCleansky guarantees Jumbo Tube Skid Container meets global quality and safety benchmarks: Third-party validation : Inspected by BV, TUV, or LRS in accordance with ISO 11120. Inspection reports cover hydrostatic tests (37.5MPa, 2-minute duration), visual checks (no surface defects), and dimensional verification (compliant with drawings).Regional compliance: Optional DOT (US) and ASME (North America/EU) certifications to meet local regulatory requirements. For European clients, ADR and IMDG certifications are available. Traceability: Each tube has a unique serial number, with full traceability of raw materials (4130X/4142 steel) and production processes (heat treatment, NDT tests).Warranty & support: 12-month standard warranty for manufacturing defects. SinoCleansky’s technical team provides on-site installation guidance and maintenance training upon request. Reference certifications and reports:

الأسئلة الشائعة

What makes the H₂ Jumbo different from an ordinary CNG tube bundle?

Upgrade 4130X alloy steel. Hydrogen embrittlement is the silent enemy of pressurized H2 equipment. Atomic hydrogen diffuses into the steel lattice under high pressure; over time it accumulates at grain boundaries and micro-defects, recombines into molecular H2, and builds internal pressure that lowers ductility and can trigger sudden cracking. Plain carbon steels are especially vulnerable. 4130X chrome-moly (Cr-Mo) alloy, quenched & tempered, delivers: (1) higher strength-to-toughness so cracks resist initiation; (2) a cleaner, finer microstructure that slows hydrogen diffusion and resists hydrogen-induced cracking (HIC); (3) weldability that lets us apply rigorous NDT on every seam. The result is a container that stays safe across its 20-year design life even under repeated 25 MPa charge/discharge cycles — turning a material weakness of ordinary steels into a controlled, certified advantage.

What pressure ratings and hydrogen capacities are offered?

Two working pressures — 20 MPa and 25 MPa, wall thickness also different according to different pressures: 14.8 mm wall at 20 MPa, 18.4 mm wall at 25 MPa for a higher safety margin. That also means 14.8mm model could load more gas volume due to the thin wall thickness, capacity bigger for every cylinder.

Is it certified and legal for international, multimodal transport?

Yes. Tube cylinder designed and manufactured to ISO 11120, inspected by BV / TÜV / LRS, and container compliant with ADR / RID / IMDG for road, rail and sea transport. Each tube carries a unique code for full traceability.

Can it carry gases other than hydrogen?

It is engineered for H₂, and also suitable for CNG (fill volume varies by medium). For other gases, please contact us for material and certification re-validation before use.